Timmy's Electric Solutions has been serving Apopka homeowners and businesses since 2000, and in 26 years we have handled just about every electrical job Orange County can throw at us. We work with homeowners, landlords, property managers, and commercial clients throughout Apopka and the surrounding area. Same-day appointments are available, and we schedule evenings and weekends when the job calls for it. Honest quotes. Code-compliant work. Reliable power.
Call (689) 362-1899 to get a quote today.
From a single dead outlet to a flickering lights problem that has been going on for months, we track down electrical faults and correct them the right way. We find it. We fix it. We test it.
When the electrician arrives, the real work begins, starting with a thorough look at the affected circuit, the panel, and the connections in between. We test outlets, check GFCI protection, inspect breakers, and trace wiring until we locate the source of the problem. Common calls include outlets that stopped working, breakers that trip repeatedly, GFCI faults in kitchens and bathrooms, and lights that flicker under load.
Work is performed by licensed electricians, and we do not leave until the circuit tests clean. We'll trace it, fix it, and test it before we leave.
If you're not sure your panel can handle the load, that is a conversation worth having before something goes wrong. Older panels were built for older homes, and the electrical demands of a modern household or commercial space can push them past their limits.
We handle full panel replacements, 200-amp service upgrades, subpanel installations, and load calculations for properties adding new circuits or major appliances. Service-entrance work and meter-base upgrades are part of the job when the situation calls for it. We pull the permit. We wire it to code. We stand behind it.
Code compliance is not optional, and we do not cut corners on it. Every panel job is permitted and inspected through the proper channels so the work is on record and your property is protected. Reach out and we'll start at the panel.
We wire homes and businesses every day, and we're good at it, from a single outlet swap to a complete rewiring of an older property.
Outlet and switch work covers standard replacements, dimmer switches, USB outlets, outdoor weatherproof outlets, and GFCI and AFCI protection where code requires it. Dedicated circuits for dryers, ranges, and 240-volt appliances are a routine part of what we do. If you are adding a large appliance or converting a space, we size the circuit correctly from the start.
For older homes in Apopka carrying knob-and-tube or aluminum wiring, we perform remediation and rewiring that brings the system up to current standards. Grounding and bonding are addressed as part of that work, not treated as an afterthought. No pressure and no gimmicks, just safe, solid wiring. We'll handle the wiring so you don't have to.
From a single dead outlet to a flickering lights problem that has been going on for months, we track down electrical faults and correct them the right way.
Keeping a home safe starts with the wiring behind the walls, and that includes every light fixture, fan, and outdoor fitting attached to it. We install and replace recessed and LED lighting, under-cabinet lighting, decorative fixtures, and ceiling fans throughout the home. Ceiling fan wiring includes new switch legs and dedicated circuits when the existing wiring is not up to the task.
Outside, we handle landscape lighting, security lights, motion-sensor fixtures, and flood lights. Florida's year-round outdoor lifestyle means exterior lighting gets real use, and we wire it to hold up in the heat and humidity. We show up ready to work.
Florida's storm season, frequent lightning, year-round heat, and backyard pools create electrical demands that are specific to this region. These three services come up regularly for Apopka homeowners and businesses, and we handle all of them.
Hurricane season runs June through November, and power outages in Central Florida can stretch for days after a major storm. A standby generator connected through a proper transfer switch keeps your home or business running when the grid goes down. We handle transfer switch installation, standby and portable generator wiring, dedicated generator circuits, and panel capacity work to support the load. If you already own a generator and need it wired correctly, we take care of that too.
Central Florida ranks among the highest in the country for lightning strikes, and a single surge can damage appliances, electronics, and wiring throughout a home. Point-of-use power strips offer limited protection. A panel-level whole-home surge protector is the right solution, and we install them with proper grounding and bonding so the surge path is controlled. We back every installation with a workmanship guarantee on every wiring job.
Orange County properties with pools, spas, and hot tubs require wiring that meets strict code requirements for safety near water. We run dedicated circuits for pool equipment, install GFCI protection at all required locations, handle the bonding requirements for pool and spa installations, and wire outdoor outlets near water features to code. Whether you are adding a new pool or bringing an existing installation up to current standards, we do the electrical work correctly from the start.
From a single GFCI outlet to a whole-home rewire, we've seen it all, and Level 2 EV charger installation is one of the most common upgrades we are doing right now.
A Level 2 home charger requires a dedicated 240-volt circuit and a panel that has the capacity to support it. We check the panel first, run the circuit to the garage or parking area, and install the charger for your vehicle, whether that is a Tesla, a Ford, a Chevy, or any other make. The job is permitted and inspected so the installation is on record with the county.
Charging at home on a Level 2 circuit is significantly faster than a standard outlet, and the wiring is sized to handle the load safely for years. We'll handle the wiring so you don't have to.
We wire homes and businesses every day, and we're good at it, which is why property managers, business owners, and general contractors call us for commercial jobs throughout Orange County.
Commercial work includes panel upgrades, tenant improvement wiring, office and retail electrical installations, restaurant and warehouse circuits, and commercial lighting. When a space is being built out or reconfigured, we coordinate the electrical work to keep the project on schedule. Code-violation repairs and failed-inspection corrections are part of what we handle, including the permit and re-inspection process.
We answer our own phones and show up in our own trucks. When you call about a commercial job in Apopka, you reach someone who knows the area and can put a crew on the property. We pull the permit. We wire it to code. We stand behind it.
Keeping a home safe starts with the wiring behind the walls, and a proper electrical inspection tells you exactly what you are working with.
We perform home electrical inspections for buyers, sellers, landlords, and property owners heading into a renovation. The inspection covers the panel, branch circuits, outlets, GFCI and AFCI protection, grounding, and visible wiring conditions. If we find code violations or safety concerns, we document them clearly and can schedule the repair work right away.
Smoke detector wiring, hard-wired carbon monoxide detectors, arc-fault breaker upgrades, and GFCI protection updates are all part of the compliance work we handle. Landlords and property managers find this service especially useful before a new tenancy or after a renovation. We show up ready to work.
If you are wondering what an electrician costs in the Apopka area, the honest answer is that pricing depends on the scope of the job, the materials involved, and whether the work requires a permit. We give you a clear estimate before any work begins so there are no surprises on the invoice.
Same-day scheduling is available for many jobs, and we work evenings and weekends when that is what the situation requires. If you have an urgent electrical problem, call us and we will tell you honestly what we can do and when we can be there.
All work is performed by licensed electricians, and we stand behind the quality of every job we complete. No pressure and no gimmicks, just safe, solid wiring.
Same-day appointments are available for many jobs, and we schedule evenings and weekends when the situation calls for it. If you have an urgent problem, call (689) 362-1899 and we will tell you honestly how quickly we can be there. For non-urgent work, next-day scheduling is often available as well.
Yes. We work with homeowners, landlords, property managers, and commercial clients throughout Apopka and the surrounding area. Office suites, retail spaces, restaurants, warehouses, and multi-family properties are all part of our regular commercial work. The same crew that handles a residential panel upgrade also handles commercial tenant improvement wiring and code compliance repairs.
Once we understand the scope of the job, we give you a clear estimate before any work starts. We walk through what we found, what needs to be done, and what it costs, so there are no surprises on the invoice. If additional work turns up once we are in the walls, we tell you before we proceed, not after.
Yes. Property managers and landlords are a regular part of our customer base in Orange County. We handle repair calls, code compliance work, GFCI and AFCI upgrades, and electrical inspections across rental portfolios. Call (689) 362-1899 to talk through what you need and how we can keep your properties in good shape.
The more you can describe, the more useful the initial conversation will be. Knowing the general problem, the age of your home, whether you have had electrical work done recently, and whether a permit was pulled for that work all help us give you a realistic estimate. For larger jobs like a panel upgrade or rewire, we typically need to see the property before quoting a firm number.
Older homes sometimes reveal wiring conditions that were not visible before the work began, such as deteriorated insulation, undersized conductors, or connections that do not meet current code. When that happens, we stop and tell you what we found before doing anything additional. You decide how to move forward with full information.
Clearing a path to your electrical panel and to the areas where the work will happen is helpful. If you know which outlets, switches, or fixtures are affected, making a quick note of them saves time during the diagnostic. Beyond that, we handle the rest.
We confirm the appointment window, and the electrician arrives ready to assess the job. We start with a diagnostic or walkthrough depending on the scope of work, then give you a clear estimate before any work begins. Work is performed by licensed electricians, and we test everything before we leave.
The price we quote is what you pay for the work that was agreed on. If something changes during the job, we communicate that before proceeding. We do not add charges after the fact for work that was not discussed.
We handle both. Sparking outlets, burning smells, a panel that will not reset, or a loss of power in part of your home are situations that should not wait. Call (689) 362-1899 and describe what you are seeing, and we will tell you honestly how quickly someone needs to be on site.
We serve Apopka and the towns and neighborhoods around it, including Ocoee, Winter Garden, Maitland, Altamonte Springs, Longwood, Zellwood, Plymouth, and Mount Dora. If you are in Orange County or just across the line into Seminole or Lake County, call us and we will let you know if we can get to you.
Fast response and local knowledge matter on an electrical job. We know the housing stock in this part of Florida, the common panel issues in older neighborhoods, and the code requirements that apply to work done here.
When you are ready to schedule, call Timmy's Electric Solutions at (689) 362-1899. Honest quotes. Code-compliant work. Reliable power.
We handle electrical work across the board, from a tripped breaker at midnight to a full panel upgrade before a major renovation. The table below breaks down what each service covers, who it fits best, and what is worth knowing before you call. Work is performed by licensed electricians, and every job is quoted clearly before we start. If you have questions about a specific situation, call us and we will walk you through it.
| Service | What the Job Involves | Common Situations | Worth Knowing |
|---|---|---|---|
| Dedicated Appliance Circuits | dryer and range circuits, 240-volt appliance wiring, workshop and garage circuits, panel capacity check | anyone adding a large appliance, converting a space, or setting up a workshop | We size the circuit correctly from the start so the wiring supports the load safely for years. |
| Breaker & Fuse Repair | breaker replacement, fuse panel service, repeated trip diagnosis, arc-fault breaker upgrades | homes where a breaker trips repeatedly or will not reset | A breaker that keeps tripping is telling you something. We find the cause before replacing parts. |
| Wiring & Circuit Installation | new branch circuits, knob-and-tube remediation, aluminum wiring repair, whole-home rewiring | older Apopka homes with outdated or unsafe wiring conditions | Grounding and bonding are addressed as part of rewiring work, not treated as an afterthought. |
| Electrical Safety Inspections | panel and branch circuit review, GFCI and AFCI check, grounding and bonding assessment, code violation documentation | buyers, sellers, landlords, and property owners heading into a renovation | If we find problems, we document them clearly and can schedule repair work right away. |
| Surge & Lightning Protection | panel-level surge protector installation, proper grounding and bonding, whole-home coverage, appliance and electronics protection | any Orange County home, given Central Florida's high lightning strike frequency | A panel-level surge protector controls the surge path in a way that point-of-use strips cannot. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgrades, full panel replacements, subpanel installation, load calculations | older homes, properties adding major appliances or EV chargers, or any panel running out of capacity | Every panel job is permitted and inspected through the proper channels so the work is on record. |
| Electrical Repairs & Troubleshooting | dead outlets, flickering or dim lights, tripping breakers, GFCI faults | any home or business with an unexplained electrical problem | We test the full circuit, not just the symptom, so the fix holds. |
| Pool & Spa Wiring | dedicated pool equipment circuits, GFCI protection at required locations, bonding for pools and spas, outdoor outlet wiring near water | Orange County properties with pools, spas, or hot tubs | Pool and spa wiring must meet strict code requirements for safety near water. We do it by the book. |
| Lighting Installation | recessed and LED fixtures, security and motion-sensor lights, landscape lighting, under-cabinet lighting | any room or exterior area that needs better, safer, or updated lighting | Florida's year-round outdoor use means exterior fixtures need wiring that holds up in heat and humidity. |
| Whole-Home Generator Installation | transfer switch installation, standby generator wiring, dedicated generator circuits, panel capacity work | Apopka homeowners and businesses preparing for hurricane season outages | Hurricane season runs June through November, and outages in Central Florida can stretch for days after a major storm. |
| Ceiling Fan Installation | fan and fixture replacement, new switch legs, dedicated circuits when needed, outdoor-rated fan wiring | homeowners adding or replacing ceiling fans where existing wiring is limited | If the existing wiring cannot support a fan, we run a proper switch leg rather than patch around it. |
| Outlet & Switch Installation | standard and USB outlets, GFCI and AFCI protection, dimmer switches, outdoor weatherproof outlets | homeowners upgrading outdated outlets or adding protection in kitchens, baths, and outdoor areas | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. |
How do I know if my electrical panel needs to be upgraded?
A few signs point clearly toward a panel that has reached its limits. If breakers trip regularly under normal use, if you are adding a major appliance or EV charger and the panel has no room, if the panel is more than 30 years old, or if you notice warm or discolored breakers, it is worth a conversation. We assess the panel and give you a clear picture of what it can and cannot handle before recommending any work.
What causes a breaker to trip repeatedly?
A breaker that trips over and over is usually responding to one of three things: a circuit that is carrying more load than it was sized for, a wiring fault somewhere on the branch, or a failing breaker that can no longer hold its rated amperage. We test the circuit and trace the cause before replacing anything. Swapping a breaker without understanding why it tripped is not a fix.
Is the electrical work permitted and inspected?
Yes. Panel replacements, service upgrades, new circuits, and other work that requires a permit are pulled and inspected through the proper channels. That means the work is on record with the county, your property is protected, and there are no surprises if you sell or refinance. We handle the permit process as part of the job.
Work Performed by Licensed Electricians
Every job, whether it is a single outlet or a full panel replacement, is handled by licensed electricians who know the code requirements for Orange County work. We do not cut corners on compliance.
Is older wiring in an Apopka home safe?
It depends on what is there and its condition. Knob-and-tube wiring and aluminum branch wiring both carry specific risks and require professional evaluation. Deteriorated insulation, ungrounded outlets, and connections that do not meet current code are concerns we look for during an inspection. If the home has older wiring, an electrical safety inspection gives you an honest picture of what you are working with.
What does a home need for a Level 2 EV charger?
A Level 2 charger requires a dedicated 240-volt circuit and a panel that has the capacity to support it. We check the panel first to confirm there is room, then run the circuit to the garage or parking area and install the charger. The job is permitted and inspected so the installation is on record. If the panel is already at capacity, we discuss the options before any work begins.
Why do outlets or switches sometimes stop working?
A dead outlet is often a tripped GFCI somewhere upstream, a loose connection at the outlet or junction box, or a wiring fault on the branch circuit. A switch that stops responding can have a similar cause, or the switch itself may have failed. We trace the circuit from the panel to the device to find the actual source rather than guessing.
Upfront Quotes With No Surprise Fees
We tell you what the work costs before we start. If something unexpected turns up during the job, we stop and explain it before doing anything additional. The price we quote is what you pay for the work that was agreed on.
What do flickering or dimming lights usually mean?
Occasional flicker when a large appliance kicks on can be normal if the panel is handling a sudden load. Persistent flickering, dimming that happens without an obvious cause, or lights that flicker across multiple rooms point to a loose connection, an overloaded circuit, or a panel that is struggling under the load. Those are situations worth having an electrician look at rather than waiting to see if they resolve on their own.
Are warm or buzzing outlets something to worry about?
Yes. A warm outlet or one that buzzes or crackles is a sign of a loose connection, an overloaded circuit, or wiring that is arcing. Those conditions can cause damage to appliances and create a fire risk over time. If you notice heat, sound, or a burning smell near an outlet, stop using it and call us. That is not a situation to monitor and revisit later.
Same-Day and Emergency Availability
Sparking outlets, a panel that will not reset, or a burning smell are not situations that should wait until Monday. Call us and describe what you are seeing, and we will tell you honestly how quickly someone needs to be on site.
How does surge protection work, and is it worth it in Central Florida?
Central Florida ranks among the highest in the country for lightning strike frequency, which makes whole-home surge protection a practical investment rather than an optional upgrade. A panel-level surge protector intercepts voltage spikes before they reach your wiring and appliances. It works differently from a point-of-use power strip and covers the entire home, including appliances that are not plugged into a strip. We install them with proper grounding and bonding so the surge path is controlled.
Do I need to be home when the electrician comes?
For most jobs, yes. We need access to the panel, the affected circuits, and the work areas. If you are coordinating for a rental property and cannot be present, a property manager or trusted contact who can provide access and answer questions about the space works well. We confirm the appointment window in advance so you can plan around it.
How do estimates and pricing work before any work begins?
We give you a clear estimate before any work starts. We walk through what we found, what needs to be done, and what it costs, so there are no surprises on the invoice. If something changes once we are in the walls, we tell you before we proceed. For larger jobs like a panel upgrade or rewire, we typically need to see the property before quoting a firm number.
Every electrical situation is a little different, so call us at (689) 362-1899 and we will talk through what you are dealing with and give you a straight answer on what it takes to fix it.
(689) 362-1899